PDX Resources : Pilot Gold – RC/Core Drill Results & Metallurgical Update Goldstrike Oxide Gold Project – Utah

Hole PGS076: 6.1 m grading 29.1 g/t Au; PGS048: 7.9 m grading 1.97 g/t Au

VANCOUVER, B.C. - Pilot Gold Inc. (PLG - TSX) ('Pilot Gold' or the 'Company') is pleased to announce additional drill results from 26 Reverse Circulation (RC) and 2 diamond core holes at the 100% controlled Goldstrike Oxide Gold Project in southwestern Utah. The primary target is Carlin-style, shallow, oxide gold mineralization on the 7 km-long, 2 km-wide 'Historic Mine Trend', between and down-dip to the north of historic open pits. Pilot Gold is also pleased to provide an update on the metallurgical program at Goldstrike.

GOLDSTRIKE MAIN TREND
Current RC drilling is focussed on defining the edges of the Main Zone, to prepare it for inclusion in a resource estimate, projected for completion in Q1 2017.

• An additional 15 to 20 RC drill holes are projected to fill in this area, covering approximately 1400 metres (m) by 300 m of strike of the Historical Mine Trend.
• On completion, approximately 5 to 10% of the High Priority area within the Historic Mine Trend will be drill defined.
• A second drill is being added to the project in early September 2016, to begin testing other areas along the Historic Mine Trend. Additional drills will be added based on results and access to proposed drill sites.

For a map of future drill targets, please click here:
http://pilotgold.com/sites/default/files/GoldstrikeFutureDrillingPR2016_17.png

DRILL HOLE RESULTS

• 0.91 grams per tonne gold (g/t Au) over 12.2 m in PGS065
• 0.49 g/t Au over 21.3 m and 0.52 g/t Au over 28.0 m in PGS067C (core hole)
• 1.97 g/t Au over 7.6 m in PGS068
• 0.50 g/t Au over 42.7 m in PGS073C (core hole)
• 29.1 g/t Au over 6.1 m, including 102 g/t Au over 1.5 m in PGS076
• 0.42 g/t Au over 33.5 m and 0.80 g/t Au over 9.1 m in PGS080
• 0.69 g/t Au over 19.8 m in PGS089

Drilling is focussed on drilling off the edges of the Main Zone around the historical Main, Hassayampa, Hamburg and Goldtown Pits. Of note is an intercept grading 29.1 g/t Au over 6.1 m in PGS076. This intercept is hosted in jasperoid in the Chainman Shale, a Paleozoic unit lying below the Claron Formation unconformity. Drill hole PGS076 is located 135 metres south of a similar intercept grading 175 g/t Au over 4.6 m in historical hole 88-011(1) mined in the Hassayampa Pit. The Chainman Shale is a new target for Pilot Gold and has also been historically mined 3.5 km to the west in the Covington Pit. The results represent assaying of four sample intervals using metallic screen methods, which confirmed the presence of coarse free gold. Coarse gold was also confirmed in PGS090 through visual analysis of panned concentrates of drill chip material and metallic screen assay.

Of 28 holes reported, 12 holes intersected notable widths of at least 0.32 to 0.45 g/t oxide gold mineralization and 5 holes had no significant results.

For photographs of representative core samples and corresponding assays for the full mineralized intercepts in core holes PGS067C and PGS073C, please click here:
http://pilotgold.com/sites/default/files/GoldstrikeCorePhotosPR2016_17.pdf

For a complete table of drill results for the current 10 holes, please click here:
http://pilotgold.com/sites/default/files/GS_Intercepts08032016.pdf

For a complete table of results for all drilling by Pilot Gold at Goldstrike in 2015 and to date in 2016, please click here: http://pilotgold.com/sites/default/files/GS_Intercepts2015to08032016.pdf

For a map of drill collars and traces for the current release, please click here:
http://pilotgold.com/sites/default/files/GoldStrikeMap_PR2016_17.jpg

After completing drilling at the Main Zone in late August, drilling will target other areas along the Historic Mine Trend, starting with the Peg Leg Graben, parallel to and south of the Goldstrike Graben. The Peg Leg Graben is 1.5 km-long, up to 250 m wide and has been tested in historic drilling by only 3 holes, all returning significant intercepts:

• Drill hole 90-035: 0.76 g/t Au over 6.1 m and 0.66 g/t Au over 9.1 m and 1.10 g/t Au over 12.2 m, starting from 61 m downhole.
• Drill hole 91-078: 0.67 g/t Au over 27.4 m, starting from 82.3 m downhole.
• Drill hole 91-077: 0.43 g/t Au over 4.6 m and 0.57 g/t Au over 10.7 m, starting from 18.3 m down hole.

The next target that will be tested is the 2 km2 Dip Slope Trend, host to the historical Padre, Hassayampa and Goldtown pits. Several significant unmined intercepts are present in this area, including 1.99 g/t Au over 13.7 m in historic drill hole 81-009. Ongoing drilling efforts will continue to test priority targets over the entire 7 km-long and 2 km-wide Historic Mine Trend, which is confirmed to be gold bearing based on 1,242 historical drill holes. Pilot Gold is currently drilling hole PGS099.

GOLDSTRIKE METALLURGY UPDATE

With the receipt of all assay data for the ten core holes, composites for metallurgical testing, including column testing, are being prepared. In addition to column testing, metallurgical testing will encompass comminution test work and bottle roll tests, in order to provide sufficient data for modeling and prediction of gold recovery over a wide range of feed sizes. Receipt of the final report is expected in Q4 2016. Cyanide soluble test results from the metallurgical core holes are shown in the table below. While portions of some holes contain transitional or sulphide material, most holes contain oxide with a very high percentage of cyanide soluble gold. In particular, the hole with the highest overall grade, PGS051C, returned an average 97.1% cyanide solubility.

Goldstrike Property

Goldstrike is located in the eastern Great Basin, immediately adjacent to the Utah/Nevada border, and is a Carlin-style gold system, similar in many ways to the prolific deposits located along Nevada's Carlin trend. Like Kinsley Mountain and Newmont's Long Canyon deposit, Goldstrike represents part of a growing number of Carlin-type systems located off the main Carlin and Cortez trends in largely underexplored parts of the Great Basin. Previous mining at Goldstrike(3) occurred from 1988 to 1994, with 209,000 ounces of gold produced from 12 shallow pits, at an average grade of 1.2 g/t Au.

(1) Historic drill intercepts from the Peg Leg Graben area were sourced from historic Tenneco Mining Co files and assay certificates.

(2) Historic drill intercepts from the Dip Slope area were sourced from historic Houston International Minerals files and assay certificates.

(3) Previous mining data sourced from: Willden, R., 2006, Goldstrike Mining District, Washington County, Utah: in Bon, R.L., Gloyn, R.W., and Park, G.M., eds., Mining Districts of Utah: Utah Geological Association Publication 32, p. 458-476.

Moira Smith, Ph.D., P.Geo., Vice-President Exploration and Geoscience, Pilot Gold, is the Company's designated Qualified Person for this news release within the meaning of National Instrument 43-101 Standards of Disclosure for Mineral Projects ('NI 43-101') and has reviewed and validated that the information contained in the release is accurate. Drill composites were calculated using a cut-off of 0.20 g/t. Drill intersections are reported as drilled thicknesses. True widths of the mineralized intervals are interpreted to be between 30-90% of the reported lengths. Drill samples were assayed by ALS Limited in Reno, Nevada for gold by Fire Assay of a 30 gram (1 assay ton) charge with an AA finish, or if over 5.0 g/t were re-assayed and completed with a gravimetric finish. For these samples, the gravimetric data were utilized in calculating gold intersections. For any samples assaying over 0.200 ppm an additional cyanide leach analysis is done where the sample is treated with a 0.25% NaCN solution and rolled for an hour. An aliquot of the final leach solution is then centrifuged and analyzed by AAS. Metallic screen techniques may be employed where the presence of coarse free gold is suspected. Approximately 1000 grams of coarse reject material are pulverized and screened. Two splits of the fine fraction are assayed, as well as all material that does not pass through the screen (the coarse fraction). The final gold assay reported is a weighted average of the coarse and fine fractions.QA/QC for all drill samples consists of the insertion and continual monitoring of numerous standards and blanks into the sample stream, and the collection of duplicate samples at random intervals within each batch. Selected holes are also analyzed for a 51 multi-element geochemical suite by ICP-MS. ALS Geochemistry-Reno is ISO 17025:2005 Accredited, with the Elko prep lab listed on the scope of accreditation.

Goldstrike is an early-stage exploration project and does not contain any mineral resource estimates as defined by NI 43-101, except for that which is noted in a NI 43-101 technical report prepared for a previous operator entitled, 'Technical Report on the Mineral Mountain Property, Washington County, Utah, USA', dated February 16, 2010, prepared by Kenneth P. Puchlik, of Puchski GeoConsultants, a 'Qualified Person' as defined by NI 43-101. The potential quantities and grades disclosed herein are conceptual in nature and there has been insufficient exploration to define a mineral resource for the targets disclosed herein. It is uncertain if further exploration will result in these targets being delineated as a mineral resource.

ABOUT PILOT GOLD

Pilot Gold is led by a proven technical and capital markets team that continues to discover and define high-quality assets. Our two core projects are Goldstrike in Utah and Kinsley Mountain in Nevada. The Company also holds important interests in two Turkish assets, Halilaga and TV Tower, and has a pipeline of Western US projects characterized by large land positions and district-wide potential that can meet our growth needs for years to come.

For more information, visit www.pilotgold.com or contact:

Evelyn Cox, Director Corporate Communications

Phone: 604-632-4677 or Toll Free 1-877-632-4677

info@pilotgold.com