Mr. Rudi Fronk reports

SEABRIDGE GOLD FINDS EXTENSION OF KSM'S MITCHELL DEPOSIT AT DEPTH

Seabridge Gold Inc.'s initial results from its 2015 core drilling program at its 100-per-cent-owned KSM project in northwestern British Columbia point toward a sizable expansion of the Mitchell deposit at depth. The size and orientation of the drill intercepts support the potential for an expansion of the cost-effective block cave operation planned for the reserves above these new intercepts. Hole M-15-130's 174 metres of 0.55 gram per tonne gold and 0.28 per cent copper is more than 200 m to the southwest of M-15-131's 167 m of 0.81 g/t gold and 0.25 per cent copper; these results appear to represent a large, continuous zone amenable to block cave mining (see the company's website).

In the past two years, Seabridge has successfully targeted higher-grade zones beneath KSM's near-surface porphyry deposits, resulting in the discovery of Deep Kerr and the Iron Cap Lower zone, two copper-rich deposits that have added nearly one billion tonnes of better grade to project resources. The program this year has continued this multiyear exploration effort to add higher-grade zones by testing the downplunge extension of the Mitchell deposit. The Mitchell deposit is KSM's largest porphyry copper-gold system, containing proven and probable reserves of 1.4 billion tonnes grading 0.60 g/t Au and 0.16 per cent Cu. In the central part of the deposit there is a zone of higher-grade gold and copper; the downplunge projection of this central zone was the target for holes M-15-130 and 131.

Seabridge chairman and chief executive officer Rudi Fronk commented that: "These initial results from Mitchell are very encouraging. The size and grade of the planned Mitchell block cave are likely to be enhanced by this data. Also, the mineralogy and textures from drill core suggest that we are approaching a zone of higher temperature and fluid flow that may offer even better grades but there is evidence of faulting which needs to be analyzed before we undertake further drilling on this target. Although we are excited about where this discovery could lead, we have decided to scale back this year's Mitchell program by about $2.2-million until we have completed our analysis of all the available data. The balance of the program will concentrate on expanding the block cave shapes associated with the Deep Kerr deposit."

The first two holes in this year's program also encountered a copper zone higher up in the section which could convert waste to ore in Mitchell open-pit scenarios which are planned to precede underground block caving. The holes were started well above and outside of the Mitchell deposit reserve in order to test the deep projection of the central zone. Significant widths of copper mineralization were intersected above the Mitchell thrust fault in magnetite-rich intrusive and sedimentary rocks near the contact of an intrusion with intervals up to 192 metres wide grading 0.34 per cent copper and 0.14 g/t gold. This style of copper-rich material has been encountered in previous drilling in this vicinity. "We will evaluate the potential of incorporating these zones into the Mitchell resource," Mr. Fronk said. "If we are able to convert in-pit waste to ore, it could have a positive impact on Mitchell economics."

Below the Mitchell thrust fault, where the Mitchell reserves and resources are located, the holes encountered identical sections of altered intrusive rocks that are recognized as host to parts of the Mitchell deposit. The intrusion is pervasively hydrothermally altered and contains abundant stockwork quartz veins. Alteration increases systematically downhole, progressing through intense quartz-sericite-pyrite and into chlorite-magnetite-orthoclase alteration. The intervals encountered in holes M-15-130 and 131 represent a distinctive intrusive body containing gold and copper grades above the Mitchell deposit average.

The table summarizes the drill hole intersections for the plunge projection of Lower Mitchell. In drill hole M-15-130, the Mitchell thrust fault is located at 601 metres and in M-15-131 it is at 691 metres.

                                      KSM DRILL RESULTS

Drill hole  Total depth     From          To         Interval   Gold    Copper   Silver
                     (m)      (m)         (m)              (m)  (g/t)       (%)    (g/t)

M-15-130        1,581.0    334.0       441.6            107.6   0.11      0.39      1.7    
                         1,207.4     1,381.8            174.4   0.55      0.28      3.3    
including                1,217.4     1,296.3             78.9   0.73      0.40      4.8    
M-15-131       1,674.0i    253.0       444.5            191.5   0.14      0.34      1.6    
                         1,190.5     1,357.5            167.0   0.81      0.25      5.0    
including                1,248.5     1,357.5            109.0   0.96      0.32      6.3    

Drill holes were oriented using historical information and designed to intercept the mineralized target at right angles to the strike of the zone. The orientation will be refined with additional drilling but current information indicates the intervals listed above accurately reflect the true thickness of the mineralized zone.

Exploration activities by Seabridge at the KSM project are conducted under the supervision of William E. Threlkeld, registered professional geologist, senior vice-president of the company, a qualified person as defined by National Instrument 43-101. Mr. Threlkeld has reviewed and approved this news release. A continuing and rigorous quality assurance/quality control protocol is employed in all Seabridge drilling campaigns. This program includes blank and reference standards, and in addition all copper assays that exceed 0.25 per cent Cu are reanalyzed using ore grade analytical techniques. Cross-check analyses are conducted at a second external laboratory on at least 10 per cent of the drill samples. Samples are assayed at ALS Chemex Laboratory, Vancouver, B.C., using fire assay atomic adsorption methods for gold and total digestion ICP methods for other elements.

We seek Safe Harbor.